Rj10 vs. Rj11 Connectors – Which one is better?
The Rj10 and Rj11 are two connectors that are important in the connection of telephone and modem devices. They have a few similarities, but what is it that sets them apart, and which one would be best for you?
Connector types for telephone devices are quite a number. They vary in their size, number of pins, capacity for devices and even configurations. It is possible to get quite confused when buying one for your devices, especially if you are not conversant with most of them.
The Rj10 connector, also known as the Rj9 and Rj22 is a device that is majorly used in the connection of telephone handsets, while the Rj11 is used in the connection of telephone lines, ADSL and also modems.
So what are their specific characteristics, and how do they differ? This article will detail a breakdown of each of them to help you decide on the best connector for your applications.
Table of Contents
What is the difference between the Rj10 and Rj11 connectors?
Connector |
Rj10 |
Rj11 (Winner) |
Physical characteristics |
Small and rectangular |
Compact square shaped |
Configuration |
4P4C |
6P2C/ 6P4C |
Application |
Telephone handsets |
ADSL, telephone lines and modems |
The Rj10 vs. Rj11 Connectors – How do they compare?
Physical Characteristics
The Rj10 is a small device that has a rectangular shape. It is considerably smaller than the Rj11 connector. The material used to build it is a rigid plastic that is transparent and lets you see the connection of wires inside.
The Rj11 is a compact device that is square shaped. It is made using the same material as the Rj10 which is rigid plastic that is also transparent. This connector has a width of 9.6mm.
Configuration
The Rj10 has a unique configuration that is a bit uncommon. It has a 4P4C pattern, which indicates that it has 4 positions and 4 connection points. This means that it can hold 4 wires at the same time.
The Rj11 has two configuration types. It has the 6P2C configuration, which has 6 positions and 2 connection points. This connector only has the capacity to handle 2 wires at the same time. The other configuration type is the 6P4C which has 6 positions and 4 connection points, giving it the ability to hold 4 copper wires at a go.
Application
The Rj10 connector is used in the linking of telephone handsets. It is not capable, however, of handling connections for telephone lines.
The Rj11 connector has a wider scope of use than the Rj10. It can be used to connect ADSL lines, telephone lines and modems.
The Rj10 vs. Rj11 Connector Overview
Rj10 Connector
- 100 Pack in the Bag of RJ9/RJ10/RJ22 modular headset/handset connectors
- Rj Registered jack Crimp Plug is suitable for the standard telephone handset and is used widely in home...
This device is also referred to as the Rj9 or the Rj22. It is a small rectangular gadget that is made using plastic material that is rigid and strong. It is a see-through device that allows for the inner connection of the wires to stay visible.
This connector has a unique configuration. It has a 4P4C pattern. This means that it has 4 connection points and 4 positions. It can handle up to 4 wires at a go.
The Rj10 has copper pins which acts as the conductor for the electromagnetic impulses. They are gold coated to prevent them from rusting. This connector is most ideal for the connection of telephone landlines. Note that it cannot be used for telephone lines.
Pros
- It is made using rigid and strong material
- It has copper pins that are treated in gold to keep them from rusting
- It is an easy to attach an terminate device
Cons
- Unlike the Rj11, it only has one configuration type
The Rj11 Connector
- RJ11 connectors for 4 Conductor Stranded Wire Round Phone Cables
- Crimp on RJ11 connectors
This device is small and square shaped, but it is bigger than the Rj10. It is also made using rigid plastic that is transparent. The material used is strong and durable.
The Rj11 has two different configurations. The first variation is the 6P2C configuration, which indicates that it has 6 positions and 2 connection points. This connector type can handle a maximum of two wires at the same time. The second variation is the 6P4C configuration. It has 6 positions and 4 connection points. This connector has the capacity for four wires at a go.
It also has copper pins that are the conductors for electromagnetic impulses. They are coated in gold to prevent them from rusting. It is ideal for ADSL, telephone lines and modems.
Pros
- It has two configuration settings
- It is strong and sturdy connector
- Its copper pins are coated in gold to prevent rusting
Cons
- It is not ideal for heavy data transmission
Conclusion
Both of these connectors have unique characteristics that make them ideal for different connections. They are both effective in their applications, especially with their unique configurations.
Verdict: So, which one is best – Rj10 or Rj11?
The Rj11 stands out for having two configuration types and also being able to support a broader range of applications.
FAQs
-
Can the Rj10 connector be used for flat cables?
Yes, it can be able to connect both flat and round cables
-
What is the maximum transmission speed for the Rj11?
It can reach a speed of 20Mbps, but it mostly operates at 14Mbps.
