Coredy Robot Vacuum won’t connect to wifi – How to Fix
The Coredy robot vacuum can save you a lot of time when it comes to cleaning especially if you have kids, pets or are a generally busy individual. However, it can equally be as frustrating as it is convenient.
The Coredy robot vacuum is a mechanical device and it’s normal for it to have functionality issues such as losing the Wi-Fi connectivity. Luckily these are issues you can fix on your own without needing to call a technician.
To fix the Wi-Fi connectivity issue, you need to ensure you are using the recommended Wi-Fi frequency band. The Coredy robot vacuum can only use the 2.4 GHz frequency band. You can also fix this issue by rebooting your router, checking if you have the correct Wi-Fi password and ensuring the Wi-Fi connection is strong enough.
In this article we will go through ways in which you can fix the Wi-Fi connectivity issue in the Coredy robot vacuum.
Table of Contents
How to Fix Wi-Fi connectivity issue
1. Type of Wi-Fi band
Modern Wi-Fi routers usually use two frequency bands, the 2.4GHz and the 5GHz. The Coredy Robot vacuum can only connect to the 2.4 GHz Wi-Fi network. You should therefore check to confirm if your router has both of these networks.
The 2.4 GHz band is preferred because it works over long distances but at a slower speed. The 5 GHz band only works over short distances but the speed is really fast.
You can find out if your router is dual band by checking the model on the manufacturer’s website or by checking the SSID name.
So if you have multiple Wi-Fi networks be sure to connect to the 2.4 GHz network for your Coredy robot vacuum.
2. Incorrect Wi-Fi password
Sometimes you may just have entered your Wi-Fi password incorrectly which disables the connection to your Coredy robot vacuum. It is important to ensure the correct password was entered.
3. Dead zone areas
You could find that your Coredy robot vacuum constantly loses its Wi-Fi connection. This could be because the connection isn’t strong enough. To improve the strength of the connection you should ensure there aren’t any dead zone areas where your robot vacuum goes through.
A dead zone area is the area where any network isn’t available. This can be anywhere from underneath your furniture to areas with large metal objects such as your refrigerator. You can easily find these areas by using your smart phone to check for available networks in areas where your robot does not connect. After finding these dead zones, try moving your router again to see if the strength of the connection improves.
You should also ensure your router is placed in a central place to ensure coverage of the connection is uniform throughout the house.
4. Wi-Fi router
At times the issue is the Wi-Fi router and you will need to reboot it in order to establish the connection again. You do this by unplugging the power cord from the back of your router then wait for 60 seconds before plugging it back in. Ensure your Wi-Fi is working correctly by connecting your other devices such as phone, tablet or computer.
After you ensure the Wi-Fi is working correctly and it still won’t connect, you can restart your Coredy robot vacuum by pressing the power button on the side and waiting for at least 10 seconds before powering it back up again.
A summary on How to Fix Wi-Fi connection issue
ISSUE |
EFFECT |
SOLUTION |
5GHz or 2.4GHz frequency band |
Coredy robot only connects to 2.4GHz |
Connect to 2.4GHz Wi-Fi network only |
Incorrect Wi-Fi password |
Disables connection |
Keep correct password |
Dead zones |
Have unavailable Wi-Fi networks |
Re-position router |
Wi-Fi router |
Disables connection |
Reboot Wi-Fi router |
Coredy robot vacuum set-up
At times, the problem could be with how you initially set up your Coredy robot vacuum. You should ensure you have done the following before trying to connect to the Wi-Fi connection:
- Ensure the power switch is ON.
- You should ensure the remote control is within the range of the robot vacuum. It is recommended for it to be within a 5m or 16ft radius.
- Ensure the battery is fully charged.
- If you still have a problem connecting after doing all these, you can restart your robot vacuum by turning the power button off then turning it back on.
Understanding Light and Sound Sequences of the Coredy Robot Vacuum
Your Coredy robot vacuum has several indicator lights and sounds that identify various issues that could arise.
Here is a quick guide explaining what the indicators and sounds mean and how you can fix the issues that arise.
INDICATOR LIGHT |
SOUND |
MEANING |
SOLUTION |
Red Bright Light
|
One beep
|
Front caster wheel may be stuck. |
Clean the front caster wheel then restart the robot. |
Two beeps |
Side brushes may be stuck. |
Clean the side brush then restart the robot. |
|
Three beeps |
Vacuum fan or filter is clogged. |
Remove and empty the bin and clean the filters. |
|
Four beeps |
Main extractors or rolling brushes can’t turn. |
Remove and clean the extractors.
|
|
Red Blinking Light |
One beep |
-Robot is stuck and one wheel is hanging mid-air.
-Robot is in a large room and can’t sense any obstacles. |
Restart cleaning in a new room. |
Two beeps |
Robot is stuck |
-Free it and start cleaning in a new room.
-Push wheels in and out to check that they both turn freely. |
|
Three beeps |
Cliff sensors are dirty, hanging over a drop or stuck on a dark surface. |
-Wipe cliff sensors with a dry cloth.
-Restart cleaning in a new room. |
|
Four beeps |
Robot is unable to return to charging dock. |
Clean charging contacts on both robot and dock with a dry cloth. |
Conclusion
By following the solutions discussed you can fix your Coredy robot vacuum and connect it back to the Wi-Fi network in no time without the help of any technician.
FAQS
How do you fix your Coredy robot vacuum when it doesn’t connect to Wi-Fi?
To fix the Wi-Fi connectivity issue, you need to ensure you are using the recommended Wi-Fi frequency band. You can also fix this issue by rebooting your router, checking if you have the correct Wi-Fi password and ensuring the Wi-Fi connection is strong enough.
Which Wi-Fi network does the Coredy robot vacuum connect to?
It can only connect to the 2.4 GHz frequency band.
