How Much Does It Cost For Comcast To Run A Cable Line?

All new Comcast clients are now required to pay for Comcast to run a cable line, before they get to enjoy any new service from Xfinity. A technician will contact you and mention that they will have to install or replace the underground cable line wiring.

When setting up a Comcast Xfinity service, the first step is the installation process. A client can choose to use an Xfinity self-install kit or purchase their own modem and have a professional visit their home and install it. Once this is done, the Comcast industry will then run a cable or line from their pole to your house. The demarcation spot is the point where the line runs into your house. You will need to have a free cable that the technician can use to connect to the point where the line will have to connect to.

For Comcast to run a new cable line, this could cost you anything from $75 to $485. The whole project could amount to a total of $132 to $287. You are also charged for every receptacle unit that you will use. These units cost anything from $3 to $50. It all depends on the type of unit that you will use. There is also the additional labor charge. The price of hiring a professional could range from $40 to $100 per hour. This will all depend on the electrician that you will be working for you.

Most cable lines are underground; however, there are instances where these lines run above ground. The lines often follow a similar route as the other utility service lines that run to your home. These lines are mostly installed when your house is in the process of being built, however, there are a few instances whereby the line is not installed or perhaps it may have been damaged and will need to be replaced. Here is what you should expect when Comcast is running a cable line to your home.

Notification messages – To ensure that you are always aware of what is going on, Comcast will send you an email or message with a progress report. You can also confirm the progress by visiting their website.

Professional Visit to Your Home – If it has already been determined that an underground cable must be installed to your home, a professional will have to ask you a few questions about your garden. Some of the basic questions may require you to give information about your sprinkler system, the animals in your yard that could dig up the ground covering the cable.

Location Request for other Underground Utilities – Before the work begins, the Comcast Company will have to place an order to the local utility lines that are also connected to your home. This could include the gas company and even the electrical company. These companies will be required to identify and mark the path that their lines follow. This step is one of the most important as it will prevent the technicians from damaging any utility line in the process of setting up the Comcast cable line.

The Underground Technicians are Assigned – As soon as the utilities lines are marked, the underground crew will start on installing the new cable line. If you wanted to be home throughout the process, or perhaps you do not want your pets or children to be around throughout the process, Comcast will contact you and you can arrange for the most preferable date.

Job Complete – Finally, you will have a brand new cable line installed to your home. You now get the chance to enjoy the Comcast Xfinity services. If there was any temporary cable line previously, it has already been removed and safely disposed of.

Factors That You Should Know

Now that we have already identified what we should expect when running a Comcast cable line to your home, here are some of the different factors that you should know about running a Comcast Cable Line.

Time Taken – The installation process will take around two to four hours. Therefore when discussing the most preferable date with the technicians, you should keep in mind that the whole process could take up to four hours.

The Size of the Coaxial Cable – The Comcast industry uses a RG6 tri shield coax cable. Compression fittings are also used on this cable.

Type of Cable Used Outside – A coaxial cable is a basic communication cable used to transfer data. The industry is filled with a variety of coaxial cables. When hooking up the cable box, you should use a coaxial cable of 75ohm and also include F-type connectors.

Hours that the Comcast Technicians Work – The technicians can work at any time from 7am to 10pm.

Tipping the Comcast Technician – Some of the technicians are often outside in the hot sun, working on your garden or digging around your home. It is always nice to show a gesture of kindness by tipping them. The technicians will definitely appreciate this.

How to Connect the Coaxial Cable to Comcast – This is easily done by connecting one end of the Coaxial cable to the wall outlet. The other end is then connected to the back of the modem. You can then connect a single end of the Ethernet cable to your computer and the other end to the Ethernet outlet that is on the back of your modem.

Conclusion

There is no power company that will install an electrical outlet for free. Similarly, the Comcast Xfinity Company will definitely charge for all types of outlet installs. Most installs include one or two free outlets. In addition, if you need to install a new coax outlet, you will have to pay $75 for the service.

Frequently Asked Questions

1. Is it possible to watch Comcast without using a cable box?

No it is not. To be able to enjoy Xfinity instant TV, you require a TV Box. You could also use the Xfinity Stream app on your smart TV, smartphone or Roku device.

2. Is Comcast considered a utility?

Yes, Comcast is considered a utility and as a utility, the company can access any utility easement.